How to set up your Roku Premiere
Roku® Premiere (model 3920R) supports 720p HD, 1080p Full HD, 4K Ultra HD (4K UHD), High Dynamic Range (HDR), and ships with a Roku simple (IR) remote. This article describes the product in more detail and outlines the setup steps.
- Note: Roku Premiere model 3920 replaces Roku Premiere model 4620. If you need help setting up model 4620, refer to the general setup instructions for any model player.
Will Roku Premiere work with my TV?
Roku Premiere will work with any television with an HDMI® connection. However, you will not be able to take advantage of 4K UHD resolution without a 4K UHD-compatible TV, or HDR without an HDR-compatible TV. A compatible television is not the only requirement to stream movies and TV shows in 4K UHD or HDR; learn more about setting up your Roku player for 4K or setting up your Roku player for HDR.
We recommend using a High Speed HDMI Cable if your TV only supports 720p and 1080p, or a Premium High Speed HDMI Cable if your TV also supports 4K UHD or HDR.
Setting up your Roku Premiere
- Review the Roku Premiere Quick Start Guide
- If desired, attach your your Roku Premiere using the adhesive strip.
- Use your TV remote to power on your television and select the input where you connected your Roku Premiere. You should see the Roku logo on the TV screen as your player powers on. Help is available if you do not see any picture on your TV.
- Slide open the battery cover on the back side of your remote and insert batteries. Help is available if you have problems with your simple remote.
On-screen setup and activation
A welcome screen will appear after you switch your TV input to where your streaming device is connected. During setup, you will choose a language, connect to the internet, download the latest updates, configure display settings, and finally activate your Roku streaming device. You must create or use an existing Roku account and then activate and link your device using an activation link sent to your email or accessed with a QR code. Learn how to enable the text-to-speech screen reader, if you need audial assistance navigating through setup.
Choose a language
The first screen you see will allow you to choose a language. Scroll through the list and press OK 
on your Roku remote to choose a language. All text and dialog within the Roku interface will be displayed in the selected language.
- Note: It is the responsibility of the channel publisher to translate their channel and some channels may not support your chosen language.
Connect to the internet
Choose your wireless network from the list of available networks and enter your password. This is often the same network you use to connect your computer or smartphone to the internet. If you do not see your network, select Scan again to see all networks. For more assistance, see help finding your wireless network and password.
If you want to see your password as you type, choose Show password. This can help prevent entering the wrong password. Remember, passwords are case-sensitive. Use the shift button 
on the on-screen keyboard to enter a capital letter.
Once you enter your password and select Connect, your device will automatically connect to the internet. Alternatively, you can get more help if you are unable to connect to your wireless network.
Download the latest updates
Once connected to the internet, your streaming device will check to see if there is a software update available, download the latest version if necessary, and automatically reboot after updating.
Configure display settings
Select Set display type and let your streaming device auto detect the best display resolution so you do not have to manually configure the settings. To change the display type at a later time, go to Settings > Display type.
If support for 4K or HDR is not detected on your compatible Roku device, and you are using a compatible TV, make sure all HDMI cables are firmly attached and all connections support HDCP 2.2. For more help, review the steps for 4K setup or HDR setup.
- Note: This step may be done automatically by your device. If this step is not shown during setup, your device was able to do this step automatically for you.
Create a Roku account and activate your device
When prompted on screen, you will need to perform the following steps to create your Roku account and complete device activation. It may take a few moments to receive the activation email from Roku. If you do not see it in your email inbox, be sure to check your spam (or junk) folder.
- Press OK on your remote to reveal the on-screen keyboard.
- Using your remote, type a valid email address. If you have a voice remote, you can press and hold the voice
button and say your email address instead.
- Important: This email will also be used as your Roku login, which is important for managing your Roku account and device services.
- If you have trouble receiving the activation link in your email, press Star
on your remote and try again or select Activate with a QR Code option. Use your mobile phone's camera to scan the QR code and get the device activation link. - Once you open the link, either from the email or QR code, follow the instructions for creating a Roku account and setting up your Roku device with channels to watch.
If you cannot get your Roku device activated, learn how to resolve linking issues. Roku does not require an activation fee, or charge for support of any kind. Learn how to avoid fraudulent websites.
Enjoy your Roku device!
With all steps complete, your Roku streaming device is ready to use. You can personalize your device by changing your theme pack or screensaver and you can use the Roku Channel Store to add new streaming channels, games, and other apps.
Why is the image not in HDR or the picture quality poor when watching HDR content?
When you specifically watch an HDR movie or TV show on your HDR-capable Roku device, you may notice the image is not displayed in HDR, or the picture quality is poor. If you encounter this behavior, you may need to update the software on your HDR-capable TV. You can typically find instructions how to do this along with the latest software on the TV manufacturer’s website. Once you confirm that your TV is running the latest software, check that it is properly configured to enable HDR on the specific input to which your Roku player is connected. Some TVs that support HDR do not enable this feature by default.